[disks]
1=. ,%DISKLABEL%

[setup]
caption=%INSTCAPTION%
uninstall="EPSON Printer and Utilities",%UNINSTDISPLAY%,"EPUPDATE.EXE /r",%UNINSTCAPTION%
application=PIS_Printer
PIS_Printer="%DRVNAME% Temporary Files",invisible
nt5printer.inf=..\..\,%INFNAME%
nt51printer.inf=..\..\,%INFNAME%
EIFVersion=5.40

[express]

[LicenseAgreement]
%DRVNAME%=%LA%

[preuninstall.winnt]
%DRVNAME%=%DRVNAME%

[PIS_Printer.winnt]
%DRVNAME%=

[kickmodule.winnt50]
%DRVNAME%=0,",DEVICEOP.EXE,/W32 /MSG:2000 /MFG:'EPSON' /DES:'%DRVNAME%' /MDL:'%MDL%' /DRV /PNP /INF /SDP /P:'USB' /P:'LPT' /LT:0,"
%DRVNAME%=0,"..\BILPT,BILPTSETUP.EXE,/P /NODISP /NOCOPYGAUGE /NOPOPUP /nodelpnp"

[kickmodule.winnt51]
%DRVNAME%=0,",DEVICEOP.EXE,/W32 /MSG:2000 /MFG:'EPSON' /DES:'%DRVNAME%' /MDL:'%MDL%' /DRV /PNP /INF /SDP /P:'USB' /P:'LPT' /LT:0,"
%DRVNAME%=0,"..\BILPT,BILPTSETUP.EXE,/P /NODISP /NOCOPYGAUGE /NOPOPUP /nodelpnp"

[kickmodule.winnt60]
%DRVNAME%=0,",DEVICEOP.EXE,/W32 /MSG:2000 /MFG:'EPSON' /DES:'%DRVNAME%' /MDL:'%MDL%' /DRV /PNP /INF /SDP /P:'USB' /P:'LPT' /LT:0,"
%DRVNAME%=0,"..\BILPT,BILPTSETUP.EXE,/P /NODISP /NOCOPYGAUGE /NOPOPUP /nodelpnp"

[kickmodule.winnt61]
%DRVNAME%=0,",DEVICEOP.EXE,/W32 /MSG:2000 /MFG:'EPSON' /DES:'%DRVNAME%' /MDL:'%MDL%' /DRV /PNP /INF /SDP /P:'USB' /P:'LPT' /LT:0,"
%DRVNAME%=0,"..\BILPT,BILPTSETUP.EXE,/P /NODISP /NOCOPYGAUGE /NOPOPUP /nodelpnp"

[message.winnt]
1013=%1013%
1000=%1000%
2000=%2000%
2001=%2001%
2002=%2002%
2010=%2010%
2011=%2011%
2012=%2012%

[addregistry.winnt]
PIS_Printer="0x80000002",4,"SOFTWARE\EPSON\Printer\%DRVNAME%","STMSetting",0x00000001,1

[Strings.0804]
MFG="EPSON"
MDL="GP-C820"
DRVNAME="EPSON GP-C820"
DISKLABEL="EPSON GP-C820"
LA="LA_SC.HTM"
INFNAME="E_BF1AKP.INF"
INSTCAPTION="安装爱普生打印设备工具"
UNINSTDISPLAY="爱普生打印机软件"
UNINSTCAPTION="卸载爱普生打印设备工具"
1100="此打印机不能用于当前的操作系统"
1000="安装完成"
1013="安装完成，请重新启动系统。"
2000 = "打印机驱动程序安装和端口设置成功。"
2001 = "打印机端口设为%PORT%。\n\n要在网络上使用打印机，根据需要改变打印机端口。"
2002 = "打印机端口设为%PORT%。\n\n要在网络上使用打印机，根据需要改变打印机端口。"
2010 = "打印机驱动程序安装和端口设置成功。\n\n重新启动计算机。"
2011 = "打印机端口设为%PORT%。\n\n要在网络上使用打印机，请重新启动计算机，然后根据需要改变打印机端口。"
2012 = "打印机端口设为%PORT%。\n\n要在网络上使用打印机，请重新启动计算机，然后根据需要改变打印机端口。"

[Strings]
MFG="EPSON"
MDL="GP-C820"
DRVNAME="EPSON GP-C820"
DISKLABEL="EPSON GP-C820"
LA="LA_EN.HTM"
INFNAME="E_BF1AKP.INF"
INSTCAPTION="EPSON Printer Utility Setup"
UNINSTDISPLAY="EPSON Printer Software"
UNINSTCAPTION="EPSON Printer Utility Uninstall"
1100="This printer cannot be used with your current operating system"
1000="Setup is complete."
1013="Setup is complete. Please reboot your system."
2000 = "Printer driver installation and port configuration were completed successfully."
2001 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, change the printer port as necessary."
2002 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, change the printer port as necessary."
2010 = "Printer driver installation and port configuration were completed successfully.\n\nRestart your computer."
2011 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, restart your computer and then change the printer port as necessary."
2012 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, restart your computer and then change the printer port as necessary."
