;;; English
[stringid]
1 =,"EPSON Printer Utilities Setup"
11=,"OK"
12=,"Cancel"
13=,"Retry"
14=,"Abort"
15=,"Please wait..."
16=,"Detection"
17=,"Manual"
18=,"-%1"
19=," (Copy %1)"
20=," (Copy %1)"
21=,"Back"
22=,"Stop"
31=,"The printer port will be configured automatically.","","Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed."
32=,""	; This string is not neccesary in case of external resource file operation.
33=,"Printer driver installation and port configuration were completed successfully."
34=,"Printer search cancelled. Because the printer port was not properly configured, printing may not be possible."
35=,"The printer may not be connected properly, or a different printer may be connected.","","Confirm the printer and its connections, then click the Retry button."
36=,"The printer may not be connected properly, or a different printer may be connected.","","Confirm the printer and its connections, then click the Retry button."
37=,"The printer port connection could not be confirmed.","See the Troubleshooting section of your manual, then try to configure the port again."
38=,"Make sure the printer is connected to the computer, then turn the printer on and wait for confirmation.","The program searches for the printer to set the printer port.","","If you do not want to configure the printer port automatically, or if your printer is connected through a network, click [Cancel]."
39=,"Make sure the printer is turned on and connected to your computer via the USB cable. The program will search for the printer and automatically configure the port.","","If you want to configure the printer port manually, or if your printer is connected via a network, click Manual."
40=,"Select the printer port from the Available Ports list and click OK."
41=,"Current Port:"
42=,"Available Ports:"
43=,"Cancelled searching for the printer.","Plug the cable connected to the printer following product manual."
44=,"The target printer has been detected.","Please wait until installation is finished."
45=,"Printer search cancelled. Because the printer port was not properly configured, printing may not be possible."
46=,"Select a printer port manually"
47=,"Search for a printer connected on the network"
48=,"Port"
49=,"Explanation"
50=,"Model Name"
51=,"IP Address(MAC Address)"
52=,"The printer was not found."
53=,"Make sure the printer is turned on and connected to your computer via the USB cable. The program will search for the printer and automatically configure the port."
54=,"If you want to configure the printer port manually, or if your printer is connected via a network, click Manual."
55=,"Click the Manual button to set the printer port yourself."
56=,"Detect the printer, and automatically configure the port.","Is the printer connected via a network?"
57=,"Yes: Network connection"
58=,"No: USB connection"
59=,"Search options..."
60=,"IPv4"
61=,"IPv6"
62=,"WSD"
63=,"Reset defaults"
64=,"Make sure the printer is turned on and connected. The program searches for the printer and automatically configures the port."
